بحث

بحث

لوحة PEI الرسمية من Creality مع لاصق لـ Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro وجميع مقاسات 235 * 235 مم ثلاثية الأبعاد طابعة

KWD 7
أسلوبخيوط لدن بالحرارة
– 1 +

مميزات خاصة

  • 【Creality Official】Creality Official Double-Sided Golden PEI Plate Kit,We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120°C，Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
  • 【Excellent Adhesion】Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well.
  • 【Easy Model Removal】When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
  • 【Simple Installation】The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.
  • 【Wide Application】The size of ender 3 PEI is 235*235mm（9.25*9.25inch). please re-level it to improve the printing effect. it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.Compatible with PLA/PETG/PEEK/ABS and any other filaments.

وصف

Creality Official Double-Sided Golden PEI Plate Kit/ Creality PEI Print Platform Kit/PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro/Voxelab Aquila 3D Printer
[Excellent adhesion] PEI Magnetic Flexible Frosted Surface Heated Bed,the composite nano-porous coating has strong adhesion after heating. It does not need glue or glue stick to avoid curling of the printing edge.
[Remove the print easily] After the printing is finished, the hot bed is cooled,the print is "squeezed out" due to the shrinkage of the microporous coating due to the decrease in temperature,can be easily removed without the aid of tools print.
[Excellent flatness]Our Pei plate is more convenient and perfect to use than Ender 3 glass bed/Creality 3D Printer Platform Tempered Plate, and can be reused without loss of performance.
[More ways to use] The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.
[More compatibility] Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender 5, Ender 5 Pro, CR 20, CR 20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers

The surface is coated with a microporous coating, which has strong adhesion, and the printed matter will not curl.

The printed matter can be taken out by hand, If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.

Very flat tempered Pei, resistant to high temperature .

Easy to clean, just wipe it with a clean damp cloth after taking out the printed matter.

Temp

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}