مميزات خاصة

This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (#45 steel), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 4mm, 5mm, 6mm, 8mm, 10mm, one carpenter pencil, one 3m tape measure and a durable storage case
One hole cutter kit replaces of dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed. It is a very practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners.
Adjustable twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes in ceilings, walls and floors, Cutting depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides
Two blades counter balance the cutter for low vibration. 2 sets of user replaceable blades: High Speed Steel blades for wood, plastics, acoustic tile, laminates, rubber; Tungsten Carbide blades for drywall, plaster, Hardi board, fiberglass, chipboard, plywood, MDF
Ball bearing mounted ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is also safe to use as protection equipment for hole cutting application

وصف

Specification:

Cutting hole diameter: 1-5/8" to 8" (40mm - 200mm)

Cutting depth: up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides

Adjustable hole cutter with tough ball bearing mounted ABS shield with silicon gasket dust seal

Application materials: Drywall, Plaster, Ceiling Tile, Soft Acoustic Tile, Plastics, Fiberglass, Acrylic Sheet, Soft Wood and PlywoodUser

User Instruction:

Requires only a hand drill with a 3/8” or larger chuck to cut holes from 1-5/8 inches to 8 inches in diameter and materials up to 1 inch thick

Ensure the cutting blade holders are tight before use

Make sure to measure the CUTOUT for the product (speaker, recessed light) you are installing. The size of the product you are installing uses a larger cutout, and the needed size is different by manufacturer of the canned light or the speaker

Screw the wing nut on to the threaded end of the spindle so that that assembly is secure

Package Includes:

One professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit)

Two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades),

1 x ABS dust shield

1 x adjustment hex wrench,

5 Pcs brad-point wood drill bits: 4mm, 5mm, 6mm, 8mm, 10mm

5 Pcs Masonry drill bits: 4mm, 5mm, 6mm, 8mm, 10mm

1 x carpenter pencil

مرحبًا،

بحث

طقم منشار ثقب قابل للتعديل من Toolly 1-5/8 بوصة إلى 8 بوصة (40-200 مم) قاطع منشار دائري بشفرة مزدوجة مع درع غبار ABS لصنع أضواء مجوفة أو فتحات مكبر صوت أو فتحات تهوية

مميزات خاصة

وصف

منتجات شبيهه