Input Voltage 4-38V (Do not exceed 38V); Output Voltage: 1.25-36V (continuously adjustable, input must be above 2V higher than output)
Input Current 0-5A (Suggest to use under 4.5A for long time work); Output Power: 75W (Max) Please strengthen the cooling when the output is above 50W
Working Temperature - 40 degree to + 85 degree, with power light, over temperature protection, but there is no reverse voltage protection. Small size, large power, high transfer efficiency, up to 96%
Two Kinds of Work Mode Constant voltage and constant current. The red indicator light can show the current working status. Light up means constant voltage mode, light off means constant current mode
Application This module can be applied to store battery, power transformer, DIY adjustable regulated power supply, 24V vehicle laptop power supply, commercial unit voltage reduction, 12V to 3.3V, 12V to 5V, 24V to 5V, 24V to 12V, 36V to 24V.Used as a charging module for lithium battery, blue light up means charging, blue light off and green light up means charging completed,Owning two high precision voltage and current pontentiometers, rotate the screw to adjust output voltage and current

Module performance and features:

Module properties: non-isolated step-down module (BUCK)

Input voltage: 4-38V (please try not to exceed 38V input)

Output voltage: 1.25-36V continuously adjustable

Output current: 0-5A, it is recommended to use within 4.5A.

Output power: It is recommended to use it within 75W, and please add a heat sink if it exceeds 50W.

Working temperature: -40~+85 degrees

Working frequency: 180KHz

Conversion efficiency: 96% higher (efficiency is related to input and output voltage, current, and differential pressure)

Load regulation: S (I) ≤ 0.8%

Voltage adjustment rate: S(u)≤0.8%

Power Indicator: Yes

Short circuit protection: yes (limit current 8A)

Over-temperature protection: Yes (automatically shut down the output after over-temperature)

Input reverse connection protection: None, (if necessary, please connect a high-current diode in series)

Installation method: 2 pieces of 3mm screws

Wiring method: welding, V-IN is input, V-OUT is output

Module size: length 54mm width 23mm height 18mm

Package includes: 5* Buck Module XL4015

مرحبًا،

بحث