How to Use:
1. Fill the front wire reel with a wire clamp.
2. Put the front wire head upwards and snap it into the left wire slot, and snap it into the bottom.
3. Put the main line of the PE line up and place it in the right card slot.
4. Lift the spool, clear the main thread with your right hand, wind it diagonally downwards, and then wind diagonally upwards.
5. Take out the wound thread.
6. Straighten the end of the thread, pinch the front wire end and the PE main line together, wrap the end of the PE thread, and tie a single knot on the two to tighten.
7. Tighten the two ends until the knot becomes tight and the color becomes darker.

Specification:
Item Type: Fishing Knot tool
Material: ABS + Stainless Steel
Product Size: Approx. 110 x 62 x 25mm / 4.3 x 2.4 x 1in
Weight: Approx. 126g / 4.4oz
Power Supply: 2 AAA Batteries 1.5V 1300mAh (Delivered Without Batteries)
Applicable Wire Type: PE Wire (No. 0.6 3), Front Wire (6 40 Pounds)

Package List:
1 x Knot Tool1 x Manual
1 x Wire Reel Clip

Note:
1. When not in use for a long time, please remove the battery.
2. When tightening the thread, please wear a protective cover to prevent the thread from hurting your hands.
3. Keep the machine clean and do not enter water.