5Pcs 6" inch Super-Thin Diamond Lapidary Saw Blade Cutting Disc Arbor Hole 5/8" Rim 0.4mm Saving in Material for Jewelry Gems Code XYP-5Pcs-150*0.3*16
Product Specification:
Diameter :150mm (close to 6")
Arbor hole :16mm (close to 5/8")
Can be used on 1/2"(12.7mm) with a bushing. Include a message when you check out telling me what size bushing you require free of charge.
Thickness:0.012"(0.3mm) core thickness / 0.016" (0.4 mm) on the edge where the diamond is
Quantity: Total 5 Pcs
Product Description:
These blades are manufactured by crimping Synthetic diamonds directly into the edge of the saw blade. They are best suited for turquoise, opal, glass, and stones in the 4-6 range on the Mohs hardness scale.
We don't recommend using this blade to cut too hard materials, such as: agate and jadeite with a Morse hardness of 6-7. Because it is difficult to cut or the blade will be damaged quickly.
SINTERED Diamond Saw Blade will perform well on any hardness rock.
Advantages: achieving satisfactory cutting results and reducing unnecessary material consumption.
This thin diamond lapidary saw blade offers a very good cost effective option for those that want either very thin kerfs or plan on short term use.
Used for Trimming: They are excellent for trimming small shapes into stones.
Use with water as a lubricant.
New, Unused Blade - Not in Original Packaging
These blades were originally packaged in oil so you will see several oil spots on the surface.