Category: PET silver paste printing circuit
Circuit level: 35V (DC), 100mA, 1W
Standard square resistance: ≤ 50Ω
Contact resistance: 10-200Ω (varies with lead length and material)
Insulation impedance: 100MΩ 100V
Dielectric withstand voltage: 250VRms (50-60Hzc.1min)
Contact jitter time: ≤ 5ms
Lead wire bending: The curvature radius is 2m, and after repeated bending at ± 90 degrees for 50 times, the lead wire strip has no cracks or peeling phenomenon
Operating pressure: 350g±15%
Switch stroke: 0.3-0.5mm
Contact impedance: ≤ 1Ω
Rated voltage: 2~24V
Contact current: 5-10mA
Service life: about 500000 times
Maximum mechanical load capacity: Apply 150N-250N operating force to the center of the button, and 60 times the button is still in good condition
Line thickness: 0.13MM