Installation instructions 1: Unscrew the screw and Remove interior door panel 2: Remove armrest and window switch bezel from door panel， If still attached, remove the window switch bezel from armrest 3: Dry fit the new bracket in the armrest to make sure of placement and position. The back side of the new bracket has a semi-circle that should fit flush with the remainder of the broken bracket. This may take some additional cutting of the broken bracket to get a proper fit, but do not remove all of the flat side as that is used for proper fitment of the new bracket. 4: Apply super glue to inside of remaining bracket in armrest (the semi-circle and inside walls), and place the new bracket into position. Quickly screw the new bracket down, using the screw that was removed, before the glue dries. 5: Reassemble door , It may work better to attach the armrest to the door panel and then attach the window switch bezel to the combined armrest/door panel. The window switch bezel may need a sharp hit with your palm to get the bezel fully seated into the new bracket; you should hear a snap once fully seated and the bezel should be flush with the armrest.