بحث

بحث

براغي لوحة ترخيص غير قابلة للصدأ متوافقة مع Honda - حامل أمامي أو خلفي - 18-8/304 درجة من الفولاذ المقاوم للصدأ - تناسب جميع الموديلات (Pilot، Accord، Odyssey إلخ) (عبوة من 4 قطع)

KWD 3
ماركة
ReplacementScrews
وزن
133 g
اللونفضة
– 1 +

مميزات خاصة

  • STAINLESS STEEL: No Rust, No Oxidation with these Grade 18-8 / A2 Stainless Steel Bolts. These Screws will Outlast Your Car.
  • TWO SETS OF SCREWS: You Will Receive Two Set of Four Stainless License Plate Screws. Eight Screws in Total. This Screw set is Engineered to Fit your Honda Vehicle.
  • FRONT OR REAR MOUNT: Screws for both Front or Rear Mounting Included. Fine Threaded is Normally for Rear, and Coarse for Front Installations. Some Models use Coarse Threaded Screws Both Front and Back.
  • CORRECT THREAD: Metric M6 1.0 Pitch Machine Thread and M5 Coarse Thread Fits Honda with both Plastic and Metal Threaded Holes.
  • EASY INSTALL: All Screws Install with a Regular Phillips Screwdriver. No Special Tools Needed. Truss Head Screws (The Self Tapping Ones) Provide Better Contact Area and a Stronger Hold.

وصف

A complete set of rear license plate replacement screws for Honda (6x20mm Machine Thread & M5x16mm Self Tapping Thread). Two sets of metric screws, eight screws in total. Four long stainless black machine screws and four short stainless black self-tapping sharp pointed screws.

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}