W10712395 Dishrack Adjuster Kit &W10508950 Slide Rail Stop Replacement for Dishwashers
Specifications
Package:W10712395 Dishwasher Dishrack Adjuster Kit &W10508950 Dishrack Slide Rail Stop(1Pack)
Size: Please check the size in the picture before purchasing.
Compatibility
WDT910SAYE2, WDT910SAYH2, WDT910SSYB2, WDT910SSYM2,so on
KUDE20FBWH0, KUDE20FBBL0, KUDE20FBSS0, so on
Please contact with us for more models.
Installation
1.Remove the older adjusters by inserting a screwdriver into the clips on the adjuster cover and prying them off very carefully.
2.Next, detach the front and rear adjuster support straps from the tines by depressing them, and remove them from the rack adjuster.
3.Note the location of the old adjuster-which should be four tines in, and pry off the stop clips to detach the old adjuster.
4.You should then be able to push the adjuster upwards. The two clips at the back need to be depressed in order to get the piece that holds the adjuster on, then you can pop the inside clip out and take the adjuster off.
5.Align the new adjuster on the rack, and replace the clips to hold the adjuster on.
6. eplace the front and rear support straps above the wheels. Position the adjuster housing by aligning the locking lever in the adjuster slot, then snap the cover on to secure.
If you find that this information does not help, please search a video on youtube on how to install it.
Warranty
To ensure our customers enjoy a good after sale service, if you are not satisfied with the products we will offer you a new replacement or refund.