بحث

Uxcell 8 مللي متر محمل نهاية القضيب M8x1.25 قضيب ينتهي وصلة كروية أنثى خيط اليد اليمنى

KWD 3

1 +

مميزات خاصة

  • SI8T/K: 8mm Bore x M8x1.25mm Internal Right-Hand Threads
  • Spherical rod end bearing for transferring motion between widely separated points, Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on
  • Machined carbon steel housing and female shank with right hand threads
  • Bronze race and hardened, chrome-plated steel ball for strength and resistance to wear and corrosion
  • Self-aligning, large load rating, low noise, anti-corrosion, tough and durable. The bearing steel ball and the copper ring are locked and squeezed so that they will not fall off.

وصف

Description:
-Rod end bearing, is used on the ends of control rods, steering links, tie rods, or anywhere a precision articulating joint is required.
-A ball swivel with an opening through which a bolt or other attaching hardware may pass is pressed into a circular casing with a threaded shaft attached.
-The housing is made of machined low carbon steel that is plated for corrosion resistance.
-Rod end bearings are used on the ends of cylinders or linkages to take up misalignment between two connected parts

Specification:
Bearing No.: SI8T/K
Material: Carbon Steel, Chrome Steel
Thread Type: Female (Internal) Thread, Right Hand
Thread Size: M8x1.25mm
Bore Diameter: 8mm
Through Bore Length: 12mm
Dynamic Load Ratings: 11.6kN
Static Load Ratings: 12.9kN
Package Content: 1Pack

منتجات شبيهه


{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}