بحث

بحث

24 فولت 115 واط ترقية سريعة الحرارة CHC Pro سخان كتلة السيراميك التدفئة الأساسية ثنائية المعدن الحرارة تدفق عالية متوافق مع Anycubic Vyper Kobra Max Sidewinder X1 X2 Volcano V6 Hotend (مجموعة كتلة الحرارة)

KWD 10.500
– 1 +

مميزات خاصة

  • Power: 24V 115W. 300°C long time printing: NTC100K B3950 thermistor is used by most of the 3D printers, we use imported chip so that this thermistor can sensor the temperature under 320°C degree, but for long printing, please keep the temperature under 300°C degree.
  • The thermistor is directly installed in the BLOCK to obtain a more realistic temperature reading when the material comes out of the hot end
  • Bimetal Heatbreak: Inner wall roughness Ra0.4, made from two components, Copper alloy and Titanium Alloy TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.
  • Ceramic heating ring with built-in copper plated heating loop. The ceramic can be heated evenly, fast heating, can reach 360°C degree loop heating. But due to the thermistor temperature limited, please keep the printing temperrature under 300°C degree for long time.
  • Package: 1x Heater block installed with heater and thermistor, 1xsilicone cover(can reach 300C degree) and 2x cables

وصف

NOTE: this Hotend is 24V voltage, 115W, please know before ordering. About the Nozzle, this kit should use Volcano nozzle, please refer to this ASIN: B07X3XF4X3

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}