مميزات خاصة

Package Content: With 2 packages of the adjustable mold housing kit for silicone mold making, you will receive 8 corners, 16 center pieces, 36 binder clips, and 2 double sided tapes, which is all the mold housing kit you could possibly need to start DIY your own silicone molds, candle molds, and soap molds.
Recommendation: It is strongly recommended to use a hot glue gun to seal the bottom to avoid leakage.
Wide Application: Our mold housing kits can be assembled into 34 different sizes of mold boxes through different combinations of these 2 packages.
How to use: Firstly, align the parts and fix them with clamps. Secondly, use double-sided tape to stick the bottom. Thirdly, try to demold after putting the blank you need into the mold.
Warm Tips: The mold shell kit is only A box frame will be formed without a bottom, for the bottom part you can use the double sided tape included in the kit to stick the mold frame to materials such as PVC sheets, ABS plastic sheets/sheets, PLA sheets / sheets, acrylic sheets, etc. once the double-sided tape is used up, you can still use materials like seamless tape.

وصف

Specification:
Color: white
Material: silica gel
Product Size:
Right Angle Board: 6.13 x 5.1 x 3.34cm / 2.41 x 2 x 1.31inch
Center Board: 5 x 5 x 1.56cm /1.96 x 1.96 x 0.61inch
Clip: 3.35 x 2.68 x 2.55cm / 1.31 x 1.05 x 1inch
Double-Sided Tap: 9.2 x 9.2 x 0.8cm / 3.62 x 3.62 x 0.31inch

Package details:
8 x right angle board
16 x center board
36 x clip
2 x double-sided tap

Note:
Due to manual measurement, the size and weight may have a certain error.
Due to the difference between different monitors, there may be a slight color difference existed.

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه