بحث

بحث

-15%

أداة أمانا - 51622 قطع ألومنيوم من الكربيد الصلب 3/64 حافة نصف قطرها × 3/16 قطر × 1/8 × 1/4

KWD 23.500
الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠. قد تحتاج إلى محول كهرباء
– 1 +

مميزات خاصة

  • Made in the USA. Solid Carbide.
  • Benefits of Zirconium Nitride (ZrN) Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life.
  • Helps to prevent the build-up of material in the flutes while cutting Have the tendency to run/spin much faster than an uncoated tool.
  • Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding.
  • Reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles).

وصف

Designed to route a finished appearance into Aluminum, brass, copper & non-ferrous metals in one pass these Amana Tool End mills utilize the ‘O' flute Up-cut design for a super-clean finish. By combining the Up-cut design along with the common 45° chamfer, you can maximize your efficiency by routing one single pass.#51622, Direction Up-cut, (D) diameter 3/16, (r) radius 3/64, (b) Cutting height 1/8, (D) shank 1/4, overall length (L) 2, type radius, flutes 1, 51622 Solid Carbide aluminum Cutting 3/64 radius edge X 3/16 dia x 1/8 x 1/4 shank ZRN coated Up-cut end mill

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}