بحث

بحث

-16%

حامل قياس سماكة Starrett، مخزون المشابك عند كلا الطرفين - سمك 0.001-.025 بوصة، طول 6 بوصة - 806D

KWD 21
KWD 25
ماركة
Starrett
– 1 +

مميزات خاصة

  • Stock up to 6-inch long is easily inserted in the holder and firmly gripped in the desired position by a cam lock.
  • This permits all of the stock to be used, because as it wears from use, the defective end can be snipped off and new stock pulled out until used up.
  • Dull nickel finish.
  • Size approximately 3/32-inch thick x 9/16-inch wide x 5-1/4-inch long.
  • Clamps have contrasting finish to eliminate the possible confusion on which end holds the thicker or thinner stock.

وصف

Starrett No. 806D thickness gage holders provide a handy, convenient means of rigidly holding single leaves or strips of thickness gage stock of any thickness from .001-.025" (0.03-0.5mm). Stock up to 6" (150mm) long is easily inserted in the holder and firmly gripped in the desired position by a cam lock. This permits all of the stock to be used, because as it wears from use, the defective end can be snipped off and new stock pulled out until entirely used up. The 806D clamps at both ends and has a contrasting finish to eliminate the possible confusion on which end holds the thicker or thinner stock.

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}