بحث

بحث

وسادة سخان سيليكون CR10 S5 مقاس 508 × 508 مم 20 بوصة × 20 بوصة سرير مُدفأ مع 24 فتحة لطابعة Creality CR-10 S5 ثلاثية الأبعاد سرير طباعة كبير، دعامة لاصقة + مستشعر (120 فولت)

KWD 59
– 1 +

مميزات خاصة

  • This silicone heating pad with 24 pre-made screw holes with dia 12mm as the picture shows is designed for creality CR-10 S5 3D printer building plate.This bed is suitable for both 24 holes and old version 4 holes S5 aluminum plate use.
  • Our Manufactuer use Arlon silicone rubber substrate imported from the United States and 3M Adhesive Backing, highest quality. Each heated bed is tested before shipping, Much safer and more reliable than other heatbeds.
  • CR10 S5 3D printer high temperateure heated bed
  • Size: 508mmx508mm With 2 meters NTC 100K 3950 thermistor for temperature Control. Power consumption: 1300W Attached with two pieces 2meters length wire
  • Caution! Before buying, please check if the 24 hole pattern conforms to that of your build plate. Pattern view from the adhesive side of this heater pad must be same to the front view pattern of your 24 hole build plate.

وصف

Packge: 1piece silicone heater pad

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}