بحث

بحث

مورس تفتق MT2

KWD 13.500
مقاسمورس تفتق MT2
الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠. قد تحتاج إلى محول كهرباء
– 1 +

مميزات خاصة

  • Quality V-Adaptor in MT3 Shank For Lathe's Tailstock-Made of Quality Tool Steel
  • Provision of Clamping piece to hold the job in place in the V grove to avoid any accident.Head Diameter is 62 mm.
  • Minimum Round Bar Diameter that can be clamped in the Vee is 8 mm
  • Maximum Round Bar Diameter that can be clamped in the Vee is 40 mm
  • 5 Interchangeable Alloy Steel Hardened Guide Bushes of 6,8,10,12,&16 mm are supplied to adapt different drill sizes & to ensure minimum drill breakage.

وصف

Quality V-Adaptor For Lathe's Tailstock. Head Diameter is 62 mm Overall Minimum Round Bar Diameter that can be clamped in the Vee is 8 mm & maximum diameter is 40 mm 5 Interchangeable Alloy Steel Hardened Bushes of 6,8,10,12,&16 are supplied to adapt different drill sizes & to ensure minimum drill breakage.

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}