مميزات خاصة

☛【Clamping Accuracy Is 0.02mm】The clamping force is strong, and the clamping accuracy is 0.02mm, which is suitable for fine operation
☛【Hardness Is Hrc40-45】Made of high-quality materials, the hardness is HRC40-45, which is not easy to squeeze and wear
☛【Well Matched With Hand Tool】Mount the chuck on the tool of the corresponding diameter, which can be well matched with the hand tool
☛【Collet Size Is Standard】The collet size is standard, the thread is accurate, and it is not easy to fall off after installation
☛【Suitable Installation On Knife Sharpener】The collet is integrally formed with a long total length and is suitable for installation on a knife sharpener

وصف

Specification:
Item Type: Collet Replacement
Model: 1/2, 1/4, 1/8in Grinding Machine Chuck
Hardness: HRC40-45
Clamping Accuracy: 0.02mm
Clamping Range: Approx. 3.175mm / 0.1in, 6.35mm / 0.3in, 12.75mm / 0.5in
Collet Total Length: Approx. 122mm / 4.8in
Collet End Diameter: Approx. 20mm / 0.8in
Tail Thread: M20
Tail Thread Length: Approx. 29mm / 1.1in
Rod Diameter: Approx. 20mm / 0.8in

Package List:
1 x 1/2-12.75mm Collet
or
1 x 1/4-6.35mm Collet
or
1 x 1/8-3.175mm Collet

Note:
1. Put each type of chuck into the corresponding diameter tool to avoid damage to the chuck because the diameter of the tool exceeds the size of the chuck model.
2. When changing tools, clean up the impurities inside the jacket in time to ensure the service life of the chuck.

مرحبًا،

بحث

M20 كوليت استبدال ماكينة الطحن اللولبية المرنة كوليت السحابة استبدال كوليت لأداة الطحن باستخدام الحاسب الآلي (1/4-6.35 مللي متر)

مميزات خاصة

وصف

منتجات شبيهه