بحث

بحث

Uxcell R8 كوليت، حامل ظرف مطحنة 1/2 بوصة 65Mn فولاذ زنبركي 7/16-20UNF

KWD 6.500
مقاس1/2 بوصة
الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠. قد تحتاج إلى محول كهرباء
– 1 +

مميزات خاصة

  • Clamping Diameter - 1/2"
  • Internally Threaded - 7/16-20UNF
  • Material - 65Mn Spring Steel
  • Hardness - HRC 55
  • Accuracy - 0.013mm (0.0005")

وصف

1.Precision ground to close tolerance
2.Hardened and ground throughout
3.Suitable for all kinds of milling machine spindle taper hole for the R8
4.It used for clamping tools,change the taper hole of spindle,It is easy to use,to enlarge the use range of machine tool

Specifications:
Clamping Diameter: 1/2-inch
Drawbar Thread: 7/16-20UNF
Material: 65Mn Spring Steel
Hardness: HRC 55
Accuracy: 0.0005-inch (0.013mm)
Total Length: 104mm / 4.09-inch
Top Diameter: 32mm / 1.26-inch
Bottom Diameter: 24mm / 0.94-inch

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}