Pokin 09905 Pressure Cooker Sealing Ring, Fits Presto Pressure Replaces Presto part 85141

Material:

Made of high-quality, durable food-grade silicone.

Compatibility:

Compatible with Presto pressure tank models: 01/C13, 01/C17, 01/C22, 01/CAA12H, 01/CAA20H, 01/CG22, 171001, 171002, 171003, 174001, 175001, 175002, 175003, 175004, 175005, 175006, 177001, 178001, 178002, 178003, 178004, 178005, 178006, 02/CAA12H, 02/CAA16H, 02/CAA20H

Package Contanin:

2x 09905 Pressure Canner Sealing Ring

2x 09905 Overressure Canner Pulgs

2x 09905 Automatic Air Vent

Installation steps:
1. Remove the used sealing ring and overpressure plug.

2. Thoroughly clean the seal ring groove and overpressure plug hole.

3. Wash the new sealing ring and overpressure plug with warm soapy water, and then dry thoroughly. Install the sealing ring until it is fully seated. Make sure to install it under the stopper and lock pin, at the inner edge of the cover.

4. Install the overpressure plug, push the side of the plug (marked "TOP"), enter the opening from the bottom of the cover. The indented part of the plug can be seen from the underside of the cover.

5. When putting the lid on the pressure cooker body, press down on the area opposite the handle with one hand. Open and close the lid several times to ensure that the ring is fully positioned.

Notice:

Only for Presto model pressure cooker