Maxi-Cure (TM) is BSI's thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly. When used with INSTA-SET (TM) activator, it works better than any putty for modifying or filling voids. When dry, it can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE (TM) also bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET (TM) in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET (TM) significantly enhances a joint's strength. For difficult to bond materials, INSTA-SET (TM) can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET (TM) is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.