Mist maker instructions
For initial use,be sure the input voltage marked on the transformer must be same as your local power supply. If not, please do not use it until get a correct transformer from your local distributor.
Place the MIST MAKER into a water container placidly, and pour into enough clean water.If the water is not enough to submerge the water-lever sensor switch, it can not generate mist;But if the water depth is too high,the mist is small or even no mist generated. Please refer to the following drawing No.2 for the best water lever. The MIST MAKER shall generate calori when it is working,the water temperature shall be rising,recommend to use it in a big volume or a good radiating water container.
Place the transformer in a drafty place,and far away moist place.
Connect the MIST MAKER with the transformer properly.
Plug the transformer into power supply and electrify,if it is correctly installed, it will start to work immediately.

PARAMETER
Limited temperature:5~40 C
Water rate:>1800mL/H
Depth of water limited :45~65mm

Products include:
1*mist maker(not with key)
1*power

Click on the shopping cart to make a purchase, make your Halloween different, and give your friends a big surprise.