Find Location: Determine the exact location for the emblem and ensure proper alignment before removing the protective film from the tape. Clean Surface: Thoroughly clean the installation area to remove any oil, grease, wax, or dirt to ensure proper adhesion. Paste Products: Remove the protective film from the adhesive tape, carefully place the emblem in the exact position, and press firmly to secure it in place. Note: Avoid exposure to large dust particles and refrain from washing the area for 24 hours to achieve optimal bond strength. Suggestions: Use a lighter or a hot hair dryer to slightly warm the adhesive tape before installation to enhance stickiness. (Keep in mind that adhesive performance can be affected by temperature conditions.)