بحث

بحث

أداة إزالة البار CNC BARLER فكي متكامل تلقائيًا فكيًا قابلاً للسحب مستقيم مقبض القابض لسبائك مخرطة الفولاذ من أجل الآلات (25 * 25 ملم)

KWD 10
الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠. قد تحتاج إلى محول كهرباء
– 1 +

مميزات خاصة

  • Integrated Jaws--The puller with integrated jaws will not break, and is strong and durable.
  • Hardened Handle--The handle of the automatic puller has been hardened and is and not easily deformed.
  • Multifunctional Screw--The puller has a built in non slip screw, the control jaw will not run out; the side lock screw effectively protects, adjusts the screw, and prevents the pulling jaw from loosening
  • Electroplated Appearance--This is a puller with an electroplated appearance, which is beautiful and wear resistant.
  • Spring Retractable Design--The automatic puller is designed as a spring retractable, which can replace the traditional hydraulic puller.

وصف

How to Use:
1. Directly install the puller on the CNC tool holder, which is mainly used for square shank series
2. The clamping opening can be adjusted to 0.8‑1.5 mm smaller than the outer circle of the material to be clamped (heavier materials can be appropriately adjusted smaller), which is suitable for gang tool, turret, and tool post CNC lathes.

Specification:
Item Type: CNC Bar Puller
Material: Alloy Steel
Purpose: Machining
Claw Hardness: HRC46-50
Clamping Range: Approx. 2.0-48.0mm / 0.1-2in
Handle Length: Approx. 63mm / 2.5in

Package List:
1 x Puller
2 x Inner Hex Wrench
1 x Spring

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}