مميزات خاصة

Note:Please make sure that the remote controller have a CH3 function button.Otherwise it does not work.
Compatible with HSP Traxxas CC01 Axial SCX10 1/10 1/8 rc car truck .Could work for 12 pieces 5mm led lights.
Method of use: Connect the JR connector to the receiver third channel(CH3), switch the controller CH3 switch swiftly twice or once and the flashing mode will change.
Work voltage: 4.8~6V. Using receiver as power supply.
Wire Length: Approx. 19cm/ 7.48inch.If you need the rc led lights,you can find it in my store.

وصف

Note:Please make sure that the remote controller have a CH3 function button.Otherwise it does not work.

Compatible with HSP Traxxas CC01 4WD Axial SCX10 1/10 1/8 RC Car.
Could work for 12 pieces 5mm led lights.
Using receiver as power supply.Work voltage: 4.8~6V

Operating Mode of Normal Switch:
Each time the third channel switch is toggled or pressed, the cycle changes:
Both outputs are off →A output is turned on,B output is off → A output is off,B output is on → Both outputs are on → Both output is off...

Operating Mode of Upgraded Switch :
Each time the third channel switch is toggled twice or pressed twice, the cycle changes:
Both output off → A output is open, B output is off → A output is off,B output is on → Both output is on → Both light breathing flash mode open → both output off... ...cycle

Wire Length: Approx. 19cm/7.48inch
Replacement parts for rc rock crawlers,and is a good choice for RC car fans.
Material: Metal, Plastic

Package include:
1 * RC CH3 LED Light Lamp Control Panel

مرحبًا،

بحث

sharego CH3 Control LED LED LID LAMP SWITCH FACTING TRAXXAS TAMIYA CC01 4WD AXIAL SCX10 1/10 1/8

مميزات خاصة

وصف

منتجات شبيهه