Input signal : PPM
Current(A):30A
Size: 89mm x 75mm x 7mm
20A ESC Brushed Speed Controller For RC Car And Boat
Constant current 20A Max 15A
PWM: 8K
Ni-Mh/Ni-cd: 4-7cell 4.8V--8.4V
It's Brushed ESC.(forward,reverse)
Li-Po: 2S
Professional Speed controller.
Driver frequency:2KHz
BEC 5V 1A
Quality can be greatly ensured.
For 1/16 1/18 1/24 car and boat
Packaging includes :1 x 20A ESC Brushed Speed Controller

Product default for JST head with switch
Wiring: short red and black->battery (must be divided into red positive and black negative)
long red and black -> motor (not divided into positive and negative)
black red and white three lines -> receiver ch2 (usually black by the outside, white by the sticker)
Adjustment: ESC is set in the neutral zone, the new control generally need to fine tune the throttle, so that the ESC light does not light up, before the neutral, control of the throttle micro is TH TRIM

Notes:
1. Please allow slightly error due to manual measurement.
2. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
3. Wish you a wonderful online shopping!