Pébéo - Setacolor Leather Marker - Matt Finish The entire Setacolor Leather range offers you high quality acrylic paint for creating and restoring on leather and leatherette. Resistant, bright colours and extra-fine tip, Setacolor Leather markers allow you to work details on smooth surfaces. Application advice It is advisable to prepare the surface with the preparator-degreaser auxiliary of the range. The colours are identical to those in the 45ml bottle. For fluorescent shades, it is preferable to apply to light-coloured surfaces. Before use, it is important to shake the marker well with the cap closed. The tip is primed very quickly, so do not press too hard or too long as the colour may escape from the tip. Replace the cap after use to prevent the tip from drying out. Store flat. A bag of 3 spare tips is available. If the tip dries out or becomes clogged, it can easily be replaced. Remove the white wick holder, then hold the white foam underneath the metal tip with two fingers to remove the tip only. Replace with a new metal tip and screw the wick holder back on. Modern, highly resistant colours Setacolor Leather colours are ultra bright, full of coverage and very resistant! They can be mixed together, allowing you to obtain an infinite number of shades. The resistance of the range has been approved by the implementation of a test protocol based on 100,000 folds, but also by a test of resistance to wet rubbing after 200 cycles in accordance with the ISO 11998 standard showing that the SETACOLOR CUIR range is 3 times more resistant than the market standards. Setacolor Leather, a complete range Setacolor Cuir offers you: 23 matte-satin colours, 12 effect colours: metallic, glitter, fluorescent, phosphorescent and duochrome, 10 markers with an extra fine tip, and 6 dedicated auxiliaries to prepare, create and protect all your leather and imitation leather creations.