Specification
Product name: GUDVES Manual Mug Roasting Machine
Product model: WT-102
Power input. 110V/220V
Product weight: 1317g/2.9lb
Product size: 24cm x 15cm x 17cm/9.6x6.7x5.9 inches
1 mug attachment.
Product features: Suitable for printing mug +highquality coaster + LCD intelligent control system
WT-102 is a kind of new model mug heat press machine , it is made upof Panel,pressure system,heating pad and other parts,rated power 350W, it fits cups with diameter of 5-7.5cm or 7.5-9.5cm, suitable for the sublimation of Ceramic cup, Glass, Metal cup, Metal pot, etc.
Four functions.
Heating temperature - set desired temperature
Heating time - set desired heating time
degrees Celsius to Fahrenheit
Temperature correction - set the proper correction temperature
Steps on how to print your digital photo onto a mug.
1. Paste the printed picture on the cup's body tightly,fix the paper with high teure resistance tape, put the cup into Heating pad.
2. Adjust the pressure of heating pad by middle screw, the pressure should be suitable.
3. There are 3 element (Initial temperature, maximum temperature,time) on the Digital Panel.
4. A lnitial temperature,press (MODE) button,setting light (SET) light up,press add key or sub key to adjust lnitial temperature.
B Heating time at Maximum temperature, press(MODE) button the third time, setting light (TIME) light up, press add key or sub key to adjust time.
C Confirm the Settings parameter,press (MODE) button the forth time,then the machine enters standby state.
D Press the execute key on the far right, then it start works.
5. Parameters of ceramic cup and glass cup (Initial temperature 230, maximum temperature 330, time 40 second ) Parameters of Metal cup, metal pot (Initial temperature 230, maximum temperature 300, time 40 second ) Note: Parameters is only for reference, please adjust Parameters in accordance with specific conditions.
6. Turn off the power after" Beep” , take out cup,tear off high temperature resistance tape, be careful of high temperature, you can also put it into water for cooling, then you have a nice cup.
Your custom mug is done!