IRON ON INSTRUCTION:
1. Iron your fabric to get any wrinkles out, and to preheat the fabric which will help the tape adhere better. Do not use steam.
2. Cut the iron on tape to desired length. Do not separate the transparent liner on top of the reflective tape.
3. Set the heat temperature of iron at about 120°C -160°C.
4. Place the tape (with the transparent liner still attached) with the adhesive side down on the fabric. The transparent liner side should be facing up toward you.
5. Put the iron onto the tape and move it along the tape pressing firmly (around 0.7kg/c㎡)- but not too firmly. Pressing too firmly will cause the tape to stretch and result in puckering. (If you are using stretchy fabric, lightly attach the tape to the fabric by lightly pressing or patting the iron down along the length of the tape then press more firmly as follows.) Iron all areas of the tape for 12-30 seconds to let the tape adhere to the fabric. Pay special attention to the edges and corners - make sure they are adequately ironed; repeat the ironing process for 3 – 5 times to the edges and corners will help greatly.
6. Wait for 30-60 seconds to let the tape and fabric cool.
7. Carefully peel off the transparent liner from the applied reflective tape. Discard the transparent liner.
8. Cover the attached reflective tape with a piece of cloth and iron on top of the cloth for a 2-3 seconds. A cotton handkerchief or cotton pillowcase works well.
9. Remove the cloth and admire your great work.

Welcome to visit LLPT on Amazon and thank you for your trust and choice to get your desired products from us and we hereby appreciated greatly to your valuable time for sharing your thoughts on our products to help us improving ourselves.