• -50% Spring Pin, Slot, 5/16x5/64 L, Pk100 KWD 3.500 KWD 7
• Backup Ring Asst, PTFE, 325 Pcs, 36 Sizes KWD 65.500
• Hanger, 3 Hole Adj, 2 W x2 1/4 L, Pk2 KWD 7
• Compress Spring, 1 1/2x0.063 In, PK5 KWD 5
• Jack Chain, Single, Zinc, Sz 16, 10 Lb, 100Ft KWD 13
• Torsion Spring, 90 Deg, 0.281OD, PK6 KWD 5
• 3" x 2" FNPT Galvanized Reducer KWD 18.500
• Forklift Seat Belt; Adjustable Up To 46"L KWD 17
• 12 Pk,Black Steel Compatible Rubber Cam Mop and Broom Holder,20400002570 KWD 12.500
• Gauge, Level/Temp, 5 in KWD 16.500
• 1/2"-13 x 7" Grade 8 Zinc Yellow UNC (Coarse) Hex Head Cap Screws, 5 pk. KWD 8.500
• 55 Gallon,Drum Gasket, 68 in Dia. 55 Gal Capacity Rubber Rubber-2040010868 KWD 11.500
• 1-1/4" x 3" OD Zinc Plated Finish Low Carbon Steel Large OD Flat Washers, 5 pk. KWD 7
• -9% Safety Pin, Zinc, 0.058x1 1/16L, Pk25 KWD 10 KWD 11
• Weld Stud, 1/4-20 x 0.710 In, PK100 KWD 11
• Vibration Isolator, 80 Lb Max, 5/16-18 KWD 5
• Brush Set for Standard Scrusher - Boot Scraper Replacement Brush Set KWD 14
• Drum 55 Gal 68 in Diameter Rubber Basco Set of 4 KWD 11.500
• Chucking Reamer, 0.2510 In., 6 Flute, HSS KWD 7
• -38% Analog Clock, 7 in Dia, Black KWD 5 KWD 8
• -6% 2 Pack of 100, 1-1/2''x1-5/8'' Square-Slotted Key Tag Numbered 1 to 100, White KWD 16.500 KWD 18
• Plastic Tip, 1 in, Pk24 KWD 6.500
• Plastic Beaker, Low Form, 50 to 600mL, 5 PK KWD 46.500
• Chucking Reamer, Cobalt, Bright (Uncoated), Straight, Oversized, 1/2 in KWD 59.500
• Chucking Reamer, Cobalt, Bright (Uncoated), Straight, Undersized, 31/64 in KWD 56
• Chucking Reamer, Cobalt, Bright (Uncoated), Straight, Letter, V KWD 52.500
• Wide Mouth Round Sample Container, Plastic, 500 mL, White, 48 PK KWD 56
• Chucking Reamer, Cobalt, Bright (Uncoated), Straight, Fractional Inch, 15/32 in KWD 59.500
• Chucking Reamer, Cobalt, Bright (Uncoated), Straight, Fractional Inch, 27/64 in KWD 49
• Chucking Reamer, Cobalt, Bright (Uncoated), Straight, Fractional Inch, 13/32 in KWD 52.500
• Headed Press-Fit Drill Bushing (H), Thin Wall, Headed, Metric, 6.00 mm KWD 18
• Press-Fit Drill Bushing (P), Standard Wall, Headless, Metric, 6.00 mm KWD 17