Dynatex DynaGrey silicone gasket maker is a single component, room temperature vulcanizing, gasketing compound designed to provide reliable "formed-in-place" gaskets for mechanical assemblies. Material is a non-slumping paste that cures to a tough, rubbery solid at room temperature on exposure to moisture in the air. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Dynatex DynaGrey silicone gasket maker is designed to provide increased oil resistance, good adhesion and flexibility; is sensor safe and non-corrosive. Type: oxime silicone. Operating temperature: -85 degree F to 500 degree F (-65 degree C to 260 degree C). Primary uses: bonding, sealing, potting, encapsulating and protective coating operations where parts must perform at high temperatures. Colors: grey. Flow/slump: NIL. Extrusion rate (1/8" orifice, 90 psi): 375 g/min. Cure characteristics - exposure to air, 77 degree F (25 degree C) and 50 percent RH. Skin-over time: 16 min. Cure time (1/8" thickness): 24 hrs. As cured - after 72 hours at 77 degree F (25 degree C) and 50 percent RH. Durometer, shore A: 30 points. Tensile strength: 210 psi. Elongation: 300 percent. Suggestions of uses should not be taken as inducements to infringe any patents. ISO Certified.