Specification:
Item Type: Current Sensor
Material: ABS
Model: ETCR50FA
Uses: Electronics industry, power communications, equipment manufacturing, power grid maintenance
Function AC leakage current, large current, high-order harmonic current, complex waveform current, transient inrush current, phase, electric energy, power,Power factor and other detection
Detection method Flexible coil CT: The output signal is the differentiation of current to time. By integrating the output voltage signal, it can be truly input Current
Coil diameter Φ7.5mm
Measuring range 0A～10000A～higher
Resolution 10mA
Accuracy grade ±1.0%FS (50Hz/60Hz: 23℃±2℃, below 70%, the wire is at the center of the coil)
Phase error ≤0.1°(50Hz/60Hz: 23℃±2℃)
Output interface 3.5mm audio frequency plug/BNC plug/tap (optional), cable length 2M
Electric field interference No hysteresis effect, free from external electric field interference
Wire position The wire to be tested is at the center of the coil, and the position error affects ≤±0.3%FS
Current frequency 45Hz～70Hz (frequency of measured current)
Response frequency 0.1Hz～1MHz
Line voltage AC 1000V or less line test
Working temperature and humidity -20℃～50℃: below 80%
Storage temperature and humidity -10℃～60℃: below 70%
Insulation strength AC 2000V/rms (both ends after the coil is unlocked)
Production Compliance CAT IV 600V ,CAT Ⅲ 1000V

How to Use:
1. Connect the transformer to the test instrument
2. According to the instrument manual, carry out instrument debugging and adjust the instrument to the mode that needs to be tested
3. Take out the circuit to be tested and put it in the coil
4. Start the test and get the reading
5. Observe the instrument reading and record the data content (http://www.etcrmeter.com/product/info?id=1228)

Package List:
1 xCurrent Sensor