HC-SR04 Ultrasonic Module Distance Sensor for Ar-duino UNO MEGA2560 Nano Robot XBee ZigBee

HC-SR04 Module main technical parameters:

Voltage: DC 5V
The Static Current: less than 2mA
Output Signal: Electric frequency signal, high level 5V, low level 0V
Sensor Angle: less than 15 degrees
Detection Distance: 2cm-450cm
Trigger Input Pulse width: 10uS
Precision: 3mm
Connection: VCC/ trig(T)/ Echo(R)/ GND (VCC supply 5V, and GND is ground wire. TRIG is trigger control signal input, ECHO is echo signal output.)

NOTE:

1.The module should be inserted in the circuit before been powered to avoid producing high level of misoperation; if produced, power it again.
2.The module is not suggested to connect directly to electric, if connected electric, the GND terminal should be connected the module first, otherwise, it will affect the normal work of the module.
3.When tested objects, the range of area is not less than 0.5 square meters and the plane requests as smooth as possible, otherwise ,it will affect the results of measuring.

Package included:

5 x HC-SR04 ultrasonic measuring sensor module.