Why choose us?
- High quality and product retroactivity reliable and improving competitiveness
- The surface is smooth and flatness is high, the naked eye can not see the inside of the factory through a variety of instruments strictly tested, such as direct reading spectrometer, ultrasonic flaw detector, hydrogen detector, cross section scanner, scanning electron microscope.
- High plasticity and corrosion resistance, cannot be strengthened by heat treatment, good plasticity during semi-cold work hardening, low plasticity during cold work hardening, good corrosion resistance, good weldability, and can be polished.
- Uses are mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil pipes, various liquid containers and other small-load parts made by deep drawing: Wire is used to make rivets.
- 5052 H32 used in decoration, packaging, construction, transportation, electronics, aerospace, bus body, scaffolding, power transmission tower, furniture, ship equipment and hardware, etc.

Specification:
- Name: Aluminum Sheet & Plate
- Color: Silver
- Model: 5052 H32
- Tensile strength (σb): 170～305MPa
- Conditional yield strength σ0.2 (MPa)≥90
- Elastic modulus (E): 69.3～70.7Gpa
- The annealing temperature is: 345°C.
- Package lncludes: 4Pack 6 in Width x 12 in Length x 0.012 in (thick)

5052 Chemical composition list:
Aluminum Al: margin
Silicon Si: ≤0.25
Copper Cu: ≤0.10
Magnesium Mg: 2.2~2.8
Zinc Zn: ≤0.10
Manganese Mn: ≤0.10
Chromium Cr: 0.15～0.35
Iron Fe: ≤0.40
Note: Single: ≤0.05; Total: ≤0.15

Note:
- Since the product is very thin, its flatness cannot be guaranteed
- If you have any questions about our aluminum sheet metal set, please feel free to contact us.