Overview:
The feeler gauge is used to measure the gap size. When checking whether the measured size is qualified, you can use this method to judge, or the inspector can judge according to the tightness of the feeler gauge and the measured surface.
It is mainly used for checking the gap valve between two joint surfaces.32 tapered feeler gauge use for engine valve clearance.32 Blades Steel Feeler Gauge calibrate 3D printers leveling.
Features:
Feeler gauge set: two kinds of feeler gauge, straight feeler gauge with 32-piece tapered feeler gauge and 32 Blades steel feeler gauge offset valve bent feeler gauge
The 360-degree swivel design allows you to unfold or fold it easily and carry it with you. You could disassembled into a separate feeler gauge to use by adjusting the screw.Metal fastening screws,and durable.
Easy identification: Dual marked metric and imperial the specification of every blade was clearly marked on the surface with laser technology so that you could distinguish them easily and choose the suitable one conveniently.
Warm notice: there is some anti-rust oil on the 65Mn-steel feeler gauge to prevent it from rusty, please don't worry about that. Please don't put on the humid environment.
32 Blades Steel Feeler Gauge Measuring range: 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm
Metric sizes (mm):
0.04，0.05，0.06，0.08，0.10，0.13，0.150.18，0.20，0.23，0.25，0.28，0.30，0.33，0.35，0.38，0.40，0.43，0.45，0.48，0.50，0.53，0.55，0.58，0.60，0.63，0.65，0.70，0.75，0.80，0.88mm
Inch sizes:
0.0015，0.002，0.0025，0.003，0.004，0.005，0.006，0.007，0.008，0.009，0.010，0.011，0.012，0.013，0.014，0.015，0.016，.017，0.018，0.019，0.020，0.021，0.022，0.023，0.024，0.025，0.026，0.028，0.030，0.032，0.035inch
32 tapered feeler Gauge Measuring range: 0.001 inch/0.03mm to 0.040inch/1.00mm
Metric sizes (mm):
0.03mm,0.04mm, 0.05mm, 0.06mm, 0.07mm, 0.08mm, 0.09mm, 0.10mm, 0.13mm, 0.15mm, 0.18mm, 0.20mm, 0.23mm, 0.25mm, 0.28mm, 0.30mm, 0.33mm, 0.35mm, 0.38mm, 0.40mm, 0.45mm, 0.50mm, 0.55mm, 0.60mm, 0.63mm, 0.65mm, 0.70mm, 0.75mm, 0.80mm, 0.85mm, 0.90mm, 1.00mm
Inch sizes:
0.001, 0.0015, 0.002, 0.0025, 0.028, 0.003, 0.0035, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.01, 0.012, 0.013, ,0.014, 0.015, 0.016, 0.018, 0.02, 0.022, 0.024, 0.025, 0.026, 0.028, 0.03, 0.032, 0.034, 0.034, 0.040inch
Complementary measurement range：
32 Blades Steel Feeler：0.43mm，0.48mm，0.53mm，0.58mm，0.88mm
32 tapered feeler gauge：0.03mm，0.07mm，0.09mm，0.85mm，0.90mm，1.00mm
Package Included：
32 Blades Straight Feeler Gauge
32 Blades Tapered Feeler Gauge