Search

Search

BIGTREETECH TMC2209 V1.3 Stepper Motor Driver, UART/STEP/DIR Mode, Ultra Silent Stepsticks Drivers with Heatsink for Octopus V1.1/Pro/SKR V1.4 Turbo/SKR 3, Manta M8P/M4P/M5P/MKS Gen L Motherboard 5Pcs

KWD 11.500
Style5*TMC2209
– 1 +

Special Features

  • Ultra-Silent Stepsticks: Featured with StealthChop2, BIGTREETECH TMC2209 V1.3 is ultra-silent two-phase stepper motor driver, with continuous drive current of 2A, peak current of 2.8A, and output capacity ranges from 5.5V to 28V. It can operate bipolar stepper motors from 1 to 1/256 step modes.
  • Low Heat-up: When StallGuard brings capability of sensorless homing to the TMC2209 driver,the CoolStep technology allows the TMC2209 to control the current dynamically, in order to adapt the motor current for excellent efficiency and low heat-up of motor and driver.
  • Precise & Efficient: Thanks to SpreadCycle technology, TMC2209 stepper motor driver enables high-precision cycle-by-cycle current control for highest dynamic movements. The lower RDSon value 0.2A of the TMC2209 makes it more energy efficient (less power lost across the MOSFET).
  • Supports UART & STEP/ DIR: Comes in 5PCS TMC2209 and heat sink. Supports uart mode by set jumper caps instead of welding on mks gen_l V2.0,SKR 3/SKR V1.4 turbo,Octopus series,Manta M4P/M5P/M8P, Our TMC2209 also has standard STEP/ DIR interfaces for easy use.
  • After-sales Service: If you have any questions about this BTT TMC2209 V1.3 UART, you can contact us at any time through Amazon, and we will give you a satisfactory answer.

Description

🌟Product Description:

🌠Material: PCB
🌠Mode: DIR/STEP,UART
🌠Motor Voltage: 5.5-28V
🌠Logic Voltage: 3.3-5V
🌠RSense: 0.11 Ohm
🌠Current: 2A (Peak 2.8A)
🌠Microsteps: 256 Subdivision

🌟Product Features:

🌠Avoid Losing Steps and Jittering
🌠Immersion Gold Proxess, The Better Antioxidant
🌠SpreadCycle: The motor controlled by the PWM chopper mode operated more smoothly and without Jitter
🌠The TMC2209 can effectively avoid problem such as running deviation losing step and fault caused by the overlode of the chip

🌟Warm Notice

🌠When the driver is inserted into motherboard, plaese pay attention to see the direction of the drive, can not be inserted in reverse, to prevent the drive from burning.
🌠Be sure to do a good job before driving heat dissipation work(heat sink+fan), to prevent the drive is not working properly.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}