Properties: 1. The knob can be pressed down to control the start and stop of the output. In addition, there is an external control switch at the back of the board (you need a quick reset button or key) to reserve the interface.
(Note: The external switch should use the self-reset button or key, press to open and then press to close;it can't realize the function of opening output when it is closed all the time, and closing output when it is not closed.)
2. Motor soft start function. When starting the motor, the current increases slowly and there is no shock current, which can effectively protect the motor and prolong its service life.
3. The duty cycle maximum and minimum limits can be set, as well as the PWM output frequency.
4. Digital encoder knob adjusts motor speed, which is more accurate and consistent than ordinary potentiometer.
5. With standard 5135 instrument shell, convenient for customer installation.
Application:
Drive motor
Brightness control
Speed control
Parameters:
Working voltage: DC 9V-60V
Rated current: 12A
Peak current: 20A
Power: 500W (max.)
Working Frequency: 1KHz-99KHz
Frequency Accuracy: 1%
Frequency Resolution: 1KHz
Working cycle: 0%-100%
Working cycle resolution: 1%
Working Temperature: -40~85°C
Working humidity: 0%-95%RH
Size: 79*43*26mm
Operation of digital encoder knob:
1. In the default interface: (the duty cycle is displayed by default)
Short press: switch motor start and stop
Long press 10s: to enter the setting interface
Counterclockwise rotation: the duty ratio decreases
Clockwise rotation: increased duty cycle
2. Under the setting screen:
Short press: select setting parameters and switch between ON-OFF, duty cycle lower limit, duty cycle upper limit and working frequency.