Specification:
Item Type: Wire Thread Insert
Material: SUS304
Model: M18 x 1.5 x 1D
Thread Specification: M18 x 1.5
Length After Installation: Approx. 18mm / 0.7in
Number of Turns Before Installation: Approx. 9.8
Outside Diameter Before Installation: Approx. 21.4-22mm / 0.8-0.9in
Drill Bit Diameter: Approx. 18.4mm / 0.7in
Wire Thread Insert Model Description: For Example: M3 x 0.5 x 1.5D, which means that after the screw is set, the female thread is M3, the pitch is 0.5, the length is 1.5D (Length refers to the length of 1.5 times the diameter, that is, 1.5 x 3=4.5mm), the length here refers to Is the length after installation.
Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, and braces. They are a new type of internal threaded fasteners made of high-strength, high-accuracy diamond-shaped cross-section steel wires; Application to low-strength engineering materials such as aluminum alloy, zinc alloy, copper, plastic, etc., can significantly improve thread strength and wear resistance.

Package List:

10 x Wire Thread Insert