T-Slot Cutters: Cutting Dia.: 30mm / 1.18"; Cutting Depth: 5mm / 0.2"; Shank Dia.: 16mm / 0.63"; Total Length: 100mm / 3.94"; Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates.
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc..
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process.
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working.
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
uxcell T-Slot Milling Cutters, 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum
KWD 7
uxcell Metric Hand Tap M5 Thread 0.8 Pitch 3 Straight Flutes H2 Alloy Tool Steel Bottom & Taper Screw Tap Set Tapping Tools for Repairing 1 Pair
KWD 3
-13%
uxcell Tap and Die and Drill Bit Set, M4 x 0.7 Left Hand Thread Milling Tap and Round Die, 3.3mm Cobalt High Speed Steel Twist Drill Bit
KWD 3.500
-14%
uxcell M4 X 0.5 Metric Round Die, Machine Thread Right Hand Threading Die, Alloy Steel Screw Thread Cutting Die
KWD 3
