MarineWeld™ is a specially formulated two-part epoxy Cold-Weld™ system that provides for strong, lasting repairs for bonding different or similar surfaces, such as metal, composites, fiberglass and others. MarineWeld sets in 4-6 hours at room temperature and is fully cured to a dark grey color in 15-24 hours. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the water's surface. MarineWeld™ has a 1:1 mixing ratio and tensile strength of 5020 PSI.

DIRECTIONS FOR USE
1. PREPARE SURFACE: Clean repair area of dirt, grease, oil, paint, rust, etc. For best results use a detergent ordegreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the bestrepair.
2. MIXING:Squeeze equal parts from each tube onto a disposable surface and mix thoroughly..
3. APPLICATION: Apply with appropriate tool in an even coat, weld bead or extrude shape as needed.
4. DRIYING: Sets in 4-6 hours. Cures in 15-24 hours. Allow 4-6 hours before handling and 15 hours (minimum)before putting object back in use.