Color: Black
Width: 1 inch, Length: 3.28 feet
Actual use length：1.64

Kindly Remind:
Not mated, The total length of the product is 3.28 inches, which is the length of one piece of material. Because two pieces of material need to be overlapped to use, the actual length used is 1.64 inches, so please compare the length to be used before buying

The 3M mushroom buckle is composed of two plastic backing materials. There are mushroom-like plastic protrusions on the backing material, which is the mushroom head. When the two pieces of the mushroom buckle are pressed together, the mushroom heads will lock each other and make a crackling sound.

Steps for usage:
Steps for usage:
1. Thoroughly clean the surface of the adhered part, remove oil, water and dust, etc., and wait for it to dry
2. Please use scissors to cut two pieces of tape of the same length with scissors as needed
3. Use scissors to take two pieces of mushroom buckle, recombine and determine the sticking position, and then tear it apart
4. Tear off a piece of buckle release paper and stick it on the surface to be pasted, then tear off another piece of buckle release paper and stick it on the object, pressing back and forth for 2 minutes.
5. After standing for 24 hours, reclose the mushroom buckle

Note:
1. The recommended working temperature is 20-38℃, and the workin temperature after bonding is -40℃—93℃
2, 3M double-lock tape is not obvious to the touch after tearing off the release paper. This is the characteristic of 3M glue. It needs a certain amount of force and continuous pressing to release its stickiness. It is recommended to stick it for 24 hours before making it heavy
3. Do not hang valuables, fragile and dangerous items, so as to avoid improper operation and fall to you and cause loss and inevitable.