Search

Search

Universal 12V DC Motor Control Radio Remote Control 10A Range 100m 200M Motor Controller Forward+Reverse+Stop Switch Linear Actuators Linear Motor

KWD 9.500
Brand
Lejin
Weight
159 g
– 1 +

Special Features

  • Application: It can be used in rolling blinds, rolling doors, projection screens, awnings, pumps, winches, conveyors or other appliances and equipments with DC motors, it can remote control DC motor rotates in the positive or reversal direction.
  • Wireless control, easy to install. You can rotate a motor in the positive or reversal direction and stop-function with the transmitter (remote control) from any place within a reliable distance.
  • You could turn on / off the receiver with transmitter (remote) from any location within a reliable distance. The wireless radio signals can pass through walls, floors and doors. The remote control has a range up to 100m-200m outdoors.
  • The product uses non-directional radio coding technology. You can use two or more units in the same place. Reliable control: The receiver only works with the transmitter which use same code. One/several transmitters can control one/several receivers simultaneously. So you don't have to worry about interference
  • Controller power consumption: standby 10mA /working current 35mA. Two control mode can reach your requirement [ Latch (1 key on / other key off)+Momentary (Press and hold -> On; Release -> Off ) Package Include: 1* Receiver (with cover) ; 1* Remote Control (with battery, If you need extra remote control , please tell us. ) The motor is not included in the package.

Description

Package Include:
1* Receiver (with cover)
1* Remote Control (with battery, If you need extra remote control , please tell us. )

Item specifics
Frequency:433 MHz
Channel:1
Wireless Communication:RF
Use:Auto door, window,lifting equipment,entrance access, up and down controller ,alarm system industrial control and security etc.
Product voltage:Dc9v to 12v
Product Load:within 60w
Output Current ≤10A
Frequency:433mhz
Remote distance:About 100M-200M(in the open field)
Standby current:10mA
Working current:35mA
Controller size:3.9inch*1.7inch*1.14inch
Independent coding, many sets will be not interference of each other
Output State: It is adjusted by the Jumper on the Receiver Board

Control mode Description
Momentary
Press the button▲ , the Motor Forward,Release is Stop.
Press the button ▼, the Motor Reverse,Release is Stop.

Latched
Press the button ▲, the Motor Forward,Press Button ■ is Stop.
Press the button ▼, the Motor Reverse,Press Button ■ is Stop.

Set control mode
Momentary----------Jumper "2&3" Pin
Latch----------------Jumper "1& 2" Pin

notice
You must turn off the power when you set control mode through jumper
Do not overload

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}