Search

Search

Bubble Cushioning Wrap Roll, 9 13/16 inch x 164 Feet Inflatable Air Column Wrap for Heavy Duty Shipping Moving Large Bubble Air Bubbles for Protecting Fragile Items with Air Pump

KWD 8.500
Brand
RESISSHO
Weight
1.4 kg
– 1 +

Special Features

  • ★ Column Bubble & More Reliable: Air Column Bubble Cushioning Wrap, made of HDPE+PA (add 20% Nylon), nine-layer co-extrusion high barrier original film, the maximum bearing capacity is 200 lbs. Stronger toughness, provides upgraded cushion protection.
  • ★ Easy to Customize Using Length: Reverse Air Check Valve design, all the column sleeves are independent, and any column fails will not affect other columns keep inflated. You can customize cushioning wrap in any length by cutting the roll, and re-customized the length before cutting without wasting any wrap! Fill any voids for transportation.
  • ★ Dimension: 164 ft X 11.8 in (50m X 30cm) for the whole roll, 10 in (26cm) wide after inflation, thickness is about 50 microns. It does not come prefilled with air. It can be filled by air pump, bicycle pump, air compressor or electric air pump. A free simple hand pump is included, not for long-term use.
  • ★ Inflate In Seconds: 1. Cut desired length of the cushioning wrap. 2. Clamp the end of the wrap piece. 3. Pump air. 4. Wrap your product in all and stick with tape. CAN'T DEFLATE AND REINFLATE. 80%-85% inflation will be fine, no need to over-inflate it. The column bubble will hold air for more than 2 months.
  • ★ Boost Your Business: ultra light packing protection, less storage space and lower cost. Suitable for heavy duty packing, shipping breakable and fragile items. Better packing supplies alternative to packing peanuts, foam, and kraft paper and traditional bubble cushioning wrap.

Description

Pai king Packing Products Co.,Ltd has been dealing in air cushion
packaging system since 2014, profession in research, development,
production of air cushion film. We have gained ISO 9001 and ISO
14001 management system certifications.

How to inflate:
Step 1: Find the air entrance area first. Check the rightest side of
bag, the inflation hole is aligning with the right end of the horizontal
arrows that pointing left. Rubbing the two layers with fingers to
find the hole.

Step 2: Insert the pump tip, and pump for several times. Put your
finger over the hole as you blow it up to avoid any creases stop
air pressure in part of the section.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}