Related Items

---

• F&D Tool Company 15281-J108 Jeweler's Slotting Saws, High Speed Steel, 1" Diameter, 0.02" Width, 3/8" Hole Size, 24 Teeth per Inch, 76 Teeth per Saw KWD 7
• F&D Tool Company 17895-FF312 Three Flute End Mill, Single End, 3/8" Mill Diameter, 3/8" Shank Diameter, 3/4" Flute Length, 2.5" Overall Length KWD 9.500
• -21% F&D Tool Company 14686 Plain Slitting Saw, High Speed Steel, 2" Diameter, 1/32" Width of Face, 38 Teeth, 1/2" Hole Size KWD 9.500 KWD 12
• F&D Tool Company 15277-J107 Jeweler's Slotting Saws, High Speed Steel, 1" Diameter, 0.018" Width, 3/8" Hole Size, 24 Teeth per Inch, 76 Teeth per Saw KWD 5.500
• -11% F&D Tool Company 26407-X112 Single Flute Countersinks, High Speed Steel, 82 Degrees, 3/8" Diameter KWD 4 KWD 5
• F&D Tool Company 27073 Combined Drills and Countersinks Bell Type, High Speed Steel, New Standard: 12, 3/16" Body Diameter, 1/16" Drill Diameter KWD 4
• F&D Tool Company 15376-J143 Jeweler's Slotting Saws, High Speed Steel, 1.75" Diameter, 0.018" Width, 1/2" Hole Size, 24 Teeth per Inch, 132 Teeth per Saw KWD 4
• F&D Tool Company 15266-J104 Jeweler's Slotting Saws, High Speed Steel, 1" Diameter, 0.012" Width, 1/2" Hole Size, 30 Teeth per Inch, 98 Teeth per Saw KWD 5
• F&D Tool Company 15318-J119 Jeweler's Slotting Saws, High Speed Steel, 1.25" Diameter, 0.018" Width, 3/8" Hole Size, 24 Teeth per Inch, 98 Teeth per Saw KWD 8.500
• F&D Tool Company 26111 Tool Pilots for Counterbores, 1/8" Pilot Diameter, 3/32" Pilot Shank Diameter KWD 4.500
• F&D Tool Company 18116-F326 Multiple Flute End Mill, Single End, High Speed Steel, 3/4" Mill Diameter, 1/2" Shank Diameter, 1.625" Flute Length, 3.625" Overall Length, 4 Number of Flutes KWD 13
• F&D Tool Company 26422-X118 Single Flute Countersinks, High Speed Steel, 82 Degrees, 3/4" Diameter KWD 7.500
• F&D Tool Company 17443-T320 Two Flute End Mill, Single End, High Speed Steel, 9/16" Mill Diameter, 1/2" Shank Diameter, 1.125" Flute Length, 3.125" Overall Length KWD 12
• F&D Tool Company 15148-B8481 Screw Slotting Saws, High Speed Steel, 2.75" Diameter, 0.018" Width of Face, 3/4" Hole Size, 25" Gauge, 72 Number of Teeth KWD 10
• F&D Tool Company 35275 Shank Type Woodruff Keyseat Cutter, Straight Tooth, Cobalt, 403 American Standard, 3/8" Diameter, 1/8" Width of Face, 2 1/8" Overall Length KWD 18.500
• F&D Tool Company 17235-AT1718 Two Flute Ball Nose End Mill for Aluminum, Single End, Long, High Speed Steel, 1/2" Mill Diameter, 1/2" Shank Diameter, 2" Flute Length, 4" Overall Length KWD 32.500
• F&D Tool Company 17232-AT1710 Two Flute Ball Nose End Mill for Aluminum, Single End, Long, High Speed Steel, 5/16" Mill Diameter, 3/8" Shank Diameter, 1.375" Flute Length, 3.125" Overall Length KWD 9
• F&D Tool Company 13032 Involute Gear Milling Cutter, High Speed Steel, Form Relieved, 14 1/2 Degree Pressure Angle, 4 Cutter Number, 16" Diametrical Pitch, 7/8" Hole Size, 2 1/8" Diameter KWD 14
• F&D Tool Company 18386-F932 Multiple Flute End Mill, Single End, Extra Long, High Speed Steel, 3/4" Mill Diameter, 3/4" Shank Diameter, 4" Flute Length, 6.25" Overall Length, 4 Number of Flutes KWD 16.500
• F&D Tool Company 23182 Two Flute, Single End, Ball Nose, Solid Carbide Endmill, 1/16" Mill Diameter, 1/8" Shank Diameter, 1/4" Flute Length, 1 1/2" Overall length KWD 5.500
• 18258-F514 Four Flute End Mill, Short Series, High Speed Steel, 7/16" Mill Diameter, 7/16" Shank Diameter, 7/8" Flute Length, 2 3/16" Overall Length, 4 Number of Flutes KWD 9
• F&D Tool Company 11681 Full Radius Straight Tooth Side Chip Slitting Saw, High Speed Steel, 4" Diameter, 1/8" Width, 1" ID KWD 64.500
• F&D Tool Company 18512-FC306 Multiple Flute End Mill, Center Cutting, Single End, High Speed Steel, 3/16" Mill Diameter, 3/8" Shank Diameter, 1/2" Flute Length, 2.375" Overall Length, 4 Number of Flutes KWD 2.500