Search

Search

DC Motor Driver Module, H-Bridge 60A Replace for Robot Competition,module

KWD 24.500
Brand
Garosa
Weight
45 g
– 1 +

Special Features

  • The large heat sink can effectively dissipate the drive module under high current and maintain the good stability of the module.
  • When driving the motor, the maximum rated current of the module can reach 60A, and the on-resistance is only 0.003 ohm.
  • The module is well-designed layout, onboard two high-power DC motor drives, high switching frequency, up to 60KHZ.
  • 10M high-speed optocoupler is used to isolate the input signal, effectively preventing the interference of the driver board to the control board.
  • The basic components of the drive module body are patches, ideal for robot competitions, etc.

Description

Specification:
Item Type: DC Motor Driver Module
The control interface is very simple: when A1.A2 = 0.0 is the brake; when A1.A2 = 1.0 is the forward rotation; when A1.A2 = 0.1 is the reverse rotation;
PA is the PWM input (motor speed adjustment); G is for the control board Common ground pin (channel B is controlled in the same way)
Both 3.3V and 5V microcontrollers can control this module, and only need one motor power (12V ~ 30V)

Package List:
1 x Module

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}