Search

Search

2pcs ZK-PP1K PWM Pulse Signal Generator Frequency Generator 1Hz-150kHz Dual Mode LCD Display 3.3-30V 5-30mA PWM Pulse Frequency Duty Cycle Adjustable Square Wave Signal Generator

KWD 7
Brand
Coliao
Weight
20 g
– 1 +

Special Features

  • 【Signal Generator Parameters】Work voltage: DC 3.3v~30v, with anti-reverse polarity protection; Frequency range:1Hz~150KH, the accuracy is about 2%; Duty cycle range:0-100%, 1% step; Number of pulses: 1-9999, or infinite (display '----' means infinite); Delay output time: 0.000s-9999s, the minimum can be set to 1ms; Positive and negative pulse width length: 0.000s-9999s, the minimum can be set to 1ms; Signal carrying capacity: ZK-PP1K: less than 30mA.
  • 【Dual Mode】Signal Generator ZK-PP1K PWM controller has 2 modes: PWM mode: adjusting frequency, duty cycle. The number of pulses is not adjustable, and the waveform is continuously sent; PULSE mode: positive pulse width time, negative pulse width time, delay start time, and the number of pulses are adjustable; With the start and stop button (ZK-PP1K can be connected to an external switch to control the output signal ON/OFF); Wide voltage input 3.3V-30V, with anti-reverse connection protection.
  • 【PWM Pulse Generator】Instruction: 1. An output waveform when powered on; 2. Waveform amplitude = power supply voltage; 3. When the number of output pulses reaches the set value, the output will be automatically stopped, and 'OUT' will disappear; 4. Press the ON key to control the presence or absence of the waveform, the disappearance of OUT means that there is no output waveform, and the output is 0; 5. Power on and restart or ON key to turn on the output, and recalculate the number of pulses.
  • 【Frequency Generator Features】ZK-PP1K can be matched with drivers to realize dimming, speed regulation, control solenoid valves, etc., but cannot directly drive loads such as electric light motor solenoid valves, etc.
  • 【Function Generator Applications】PWM signal generator, square wave rectangular wave signal generator can be used used to generate square wave and rectangular wave signals to control DC motor or stepper motor driver; it is used for servo motor, stepper motor, electric gripper, replace PLC pulse, etc.

Description

ZK-PP1K PWM Pulse Signal Generator 1-Channel 1Hz-150kHz Dual Mode PWM Pulse Frequency Square Wave Signal Generator Module LCD Display 3.3-30V 5-30mA Pulse Frequency Generator with Shell

ZK-PP1K Description:
This signal generator is a device that provides electrical signals at a variety of frequencies, square wave, pulse and output levels. It supports dual mode: PWM mode and PULSE mode. It is used as a signal source or excitation source for testing. Widely used in production practice and technology.

Features:
Dual mode: PWM mode and PULSE mode
LCD high definition display
Support frequency adjustment
Support duty cycle adjustment
High precision detection
Support power-down memory function
1-Channel signal output
Support reverse protection
Support enabled/disabled output

Parameter:
Model: ZK-PP1K
Work voltage: DC 3.3V -30V
Frequency range: 1Hz~150KHz
Frequency accuracy: 2%
Duty cycle range: 0.00%-100%
Output current: Number of pulses: 1~9999 or Infinite
Delay time: 0.000s~9999s
Pulse width: 0.000s~9999s
Time accuracy: 1ms
Output amplitude: Same to input voltage
Work Temperature: -20 -85℃
Work Humidity: 0% -95%RH

Package Included:
2pcs ZK-PP1K Signal Generator Dual Mode PWM Motor Speed Controller PP1K

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}