Search

M4 Inductive Proximity Sensor Switch Non-Shield Type LJ4A3-1.5-Z/BX Detector 1.5mm 10-30VDC 150mA NPN Normally Open(NO) 3 Wire

KWD 4.500

Brand
Heschen
Category
Sensors
Weight
23 g
1 +

Special Features

  • Mounting Hole Diameter: 4mm; Cable length: 200cm/78"
  • Detecting Distance: 1.5mm±10%; Set distance: 0-1.2mm
  • Output Type: NPN NO(Normally Open); Non-Shield(non-flush)
  • Current Output: 150mA; Working Voltage: 10-30 VDC
  • Detect Object: Magnetic Metal

Description

Detection Object: Magnetic metal(the detection distance decreases when it is non-magnetic metal).
Delay Distance: 10% below of the detection distance.
Supply Voltage:DC10-30V Impulse (p-p)10% below.
Comsuption Current: 13mA below.
Control Output:150mA below.
Loop Protection: Reversal connection protection,surge absorption,load short-circuit protection.
Ambient Temperature & Humidity:During operation, storage: individually-30~+65℃(no freeze ,no drew ), During operation,storage:individually 35-95%RH.
Insulation Impedance: 50MΩ above ( DC500 megameter ) between charging part and shell.
Withstand Voltage: AC1000V 50/60Hz 1 min. between charging part and shell.
Temperature Influence: Temperature range-30~+65℃,at + 23℃,± 15% detection distance, Temperature range-25~+60℃,at +23℃,±10% detection distance.
Voltage influence: Inside ±15% rated supply voltage range,at rated supply voltage value ,inside ± 10 % detection distance.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}