The package includes:1 True-USB TL866II MiniPRO Programmer 1 USB Cable,1 ICSP cable(6pins) 1 qfp32-100 adapter 1 SOP8-DIP8 150mil adapter 1 SOP8-DIP8 200-208mil adapter 1 PLCC44-DIP44 adapter 1 PLCC32-DIP32 adapter 1 wson8 (6 5 /8 6 )Adapter 1 SOP8/msop8/tssop8/ssop8/SOP16-DIP16 simple adapter 1 PLCC IC extractor. tl866II discription: High-speed programming Built-in high-performance, high-capacity USB interface microcontroller, communication speed 12Mbps, with (for each chip) well-designed programming algorithms and USB high-speed communications. May be the fastest development of integrated programming type one, the speed has been in line with the needs of small quantities of fast production. Compared to similar products, some chip programming speed several times faster, or even 10 times, 4Mbits of parallel FLASH ROM, the programmer programming (erase, write, verify the total time) only 36 seconds, read and write a 32MB TE28F320 just 32 +79 seconds, and most parallel FLASH chip programming at the same time, found that errors can terminate programming immediately, read and write a 8Mbits serial 25P80 only 12 seconds (read) +18 seconds (write) time . 64MB capacity of the fastest chip only 96 seconds +160 seconds. Supports common 25PIN and 16PIN package of high-capacity 25 series chips. The same computer can connect 4 programmers for mass production operations. Programmed programming power supply The VPP and VCC programming voltages are individually programmable and programmable from 1.8 to 6.5V for VCC and 1.8V to 18V for VPP. Power by the multi-stage LC filter, minimal ripple. the best over-voltage, over-current protection Programmer VCC VPP power independent internal 3-level overcurrent protection, plus a level of software automatically cut off the power supply protection.