Fiberglass Supply Depot 6LB Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boats, Dock Flotation, Carving, Soundproofing, Filling Voids, and Insulation (Quart Kit)
Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
6LB. Density polyurethane flotation Foam 1 Quart Kit; Consists of 1 Pint of Part A and 1 Pint of Part B and produces 0.375 cubic feet.
Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
The 6LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications
All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
3M TALC Scotch ATG Adhesive Transfer Tape 924, Clear, 3/4 in x 36 yd, 2 mil
KWD 5
4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (Quart Kit)
KWD 16.500
2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)
KWD 30.500
4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)
KWD 30.500
