Surface thermocouple probes are mainly used to measure flat temperature and are applied to industrial equipment, HVAC systems (heating, ventilation, and air conditioning systems, measuring the surface temperature of pipe line systems), etc. Thermocouples can be used to measure temperature and are widely used as temperature sensors for temperature measuring instruments.
Surface thermocouple probes, are in size of :1.3m/4ft wire length, 0 to 1000C measuring temperature, 120mm/4.7 inch handle length, 200mm/8 inch stainless steel rod length, 4mm/0.16 inch needle dia, 12mm/0.47 inch needle distance
Wide measuring range, high accuracy, and accurate temperature measurement; Simple assembly and convenient replacement; Easy to use
Steps of installation: Before measuring the temperature, ensure that the surface of the measured object is clean and dry; Connect the surface thermocouple probe to the thermocouple meter or other temperature measurement equipment, and place the surface thermocouple probe on the surface where the temperature is to be measured; Reading temperature
Temperature range to be measured shall be considered when selecting thermocouple
-14%
MECCANIXITY Thermocouple Temperature Sensor M8 Screw Temperature Probes J Type 6.6ft 0 to 750°C(32 to 1382°F)
KWD 3
MECCANIXITY Surface Thermocouple 5.6" Probe K Type Yellow Coiled Wire -50 to 650C for Temperature Senor Measurement
KWD 3.500
MECCANIXITY 15pcs K Type Thermocouple Mini Connector Temperature Sensor Probes Fiberglass 3.3ft -50 to 400°C(-58 to 752°F)
KWD 7
MECCANIXITY K Type Thermocouple Temperature Sensor PT100 6mm Ring High Temperature Probe 6.6ft Wire 0 to 600°C(32 to 1112°F) Stainless Steel
KWD 4
