The patented design, different from the ordinary rail connector, does not require the tedious tightening of screws, just insert the guide terminal into the 35mm iron and aluminum DIN guide, lift the orange clip, insert the wire into the hole until you feel the resistance, then lower the orange lever and complete the operation, saving 70% of the operation time. Specifications: ➤Terminal Blocks UK5N: It can connect two conductors with ease, even large conductor cross sections are not a problem. Can be used on DIN Rail 35mm, steel or aluminum.
Material: Nylon PA66 Housing + Brass Metal Bodies
Rated voltage: 250V. Rated current: 32A
Solid Wire (AWG/mm²): 28-12, IEC 0.08-4, Flexible Wire(AWG/mm²): 20-14, IEC 0.5-2.5.
➤End Stopper Bracket: Terminal fixed component mark clamp and marl strip could be blocked onto it to mark it, additionally, it could be used as fixed component to terminal row's termination ➤Package Included: 20 x Terminal Blocks
2 x Connection Bar
2 x Digital Identification
20 x Screws
2 x End Stopper Bracket
1 x Transparent Storage Box.
Warm note: 1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
How to use the wire nuts: 1.Strip off the housing of wires to 0.35-0.40inch
2.Push the orange levers to 90°,and make sure that wires are plugged into the end.
3. put the levers back.